🎣 Fishing Macro – Complete Automation System

📦 What’s Included in the Fishing Macro

• FischV12.ahk – Main macro script with GUI interface
• 20+ Rod Configs – Pre-tuned .ini files for every major rod
• Visual Detection System – Computer vision-based automation
• Multiple Detection Modes – Click, pixel, and hybrid shake detection
• Minigame Automation – Bar tracking and fish position control
• Resolution Scaling – Works across different screen sizes

🎯 Key Features

📥 Fishing Macro Installation

1. Download AutoHotkey v1.1
   Visit https://www.autohotkey.com/ and download AutoHotkey version 1.1 (NOT v2). Run the installer and choose Express Installation.
2. Download Fishing Macro Package
   Click the download button above to get the complete Fisch macro package containing FischV12.ahk and all rod configuration files.
3. Extract Files
   Unzip the downloaded package to an accessible location:
   C:\Users\YourName\Documents\FischMacro
4. Launch the Macro
   Double-click FischV12.ahk to open the macro GUI. The settings window will appear with three tabs: General Settings, Shake Settings, and Minigame Settings.
5. Load Rod Configuration
   At the bottom of the GUI, find the “Configs list” dropdown. Select your rod (e.g., polaris.ini), then click “Load settings”. This automatically configures all optimal values for your specific rod.
6. Prepare Your Game
   In Roblox Fisch:
   • Set graphics to Low (or enable “Auto Lower Graphics” in macro)
   • Zoom camera in fully
   • Look down at fishing area
   • Position character near water
   • Equip your fishing rod
7. Start Fishing
   Click “Save settings” then “Start Macro”. The automation begins immediately.
   
   Hotkeys: Press F1 to pause/resume, F2 to stop completely.

🎣 Available Rod Configurations

The fishing macro includes optimized settings for 20+ different rods. Each configuration is tuned for that rod’s specific Control stat, shake patterns, and minigame behavior.

⚙️ Advanced Configuration Guide

General Settings

Shake Settings

Minigame Settings

💡 Fishing Macro Pro Tips

• 🎯 Start with Polaris: Most stable config for first-time users
• ⚙️ Adjust for Your PC: Slower computers need higher delays
• 🌊 Clear Fishing Spots: Choose locations with unobstructed water
• 🎮 Use Windowed Mode: Easier to monitor and adjust settings
• 📊 Track Results: Log fish caught per hour to optimize settings
• 🔄 Change Locations: Move spots every 1-2 hours

💎 Treasure Appraisal Macro – Weight Multiplier Grinding

📦 What is Treasure Appraisal Macro?

The Treasure Appraisal Macro automates the treasure appraisal process to achieve optimal weight multipliers (KG multipliers) without manual clicking. Created by lolzzn, this tool uses visual overlay positioning and OCR number reading to repeatedly appraise fish until reaching your target weight or money limit.

✨ Key Features

📥 Treasure Appraisal Installation

1. Ensure AutoHotkey v1.1 is Installed
   If you haven’t already, download and install AutoHotkey v1.1 from https://www.autohotkey.com/
2. Download Treasure Appraisal Macro
   Click the download button above to get the treasure appraisal macro package.
3. Extract Files
   Unzip to an accessible location:
   C:\Users\YourName\Documents\FischAppraisal
4. Launch Roblox in Fullscreen
   
   ⚠️ Critical Requirement This macro MUST be used in fullscreen mode. Windowed mode will not work due to coordinate detection. Press F11 in Roblox or use settings to enable fullscreen.
5. Run the Macro Script
   Double-click the extracted .ahk file to launch. The 4-step visual calibration wizard begins automatically.

⚙️ 4-Step Visual Overlay Setup

The macro requires positioning colored detection boxes over specific UI elements. Use R to confirm each step.

1. Step 1: First Fish Slot (Green Box)
   A green resizable box appears. Move and resize it to completely cover the first fish slot (top-left appraisal position). Press R to confirm.
2. Step 2: Second Fish Slot (Green Box)
   Another green box appears. Position it over the second row, middle fish slot. Ensure it covers the entire appraisal area. Press R to confirm.
3. Step 3: Weight Number Zone (Yellow Box)
   A yellow box appears for OCR number detection.
   
   CRITICAL: Position this box to ONLY cover the multiplier numbers (e.g., “1.5”, “2.0”). Do NOT include the “KG” letters or “E” from “APPRAISE”. The box must be tight around just the numbers. Press R to confirm.
   ⚠️ Precision Required Including letters breaks OCR detection. Only numbers should be in the yellow box.
4. Step 4: Reappraise Button (Green Box)
   The final green box for the reappraise button.
   
   Important: You must manually fail an appraisal first to reveal the reappraise button. Then position the green box over it and press R to complete setup.

🔄 Retaking Individual Steps

The macro includes buttons to recalibrate specific steps without redoing everything:

• Retake All: Restart entire 4-step process
• Retake Step 1: Reposition first fish slot only
• Retake Step 2: Reposition second fish slot only
• Retake Step 3: Reposition weight number zone only
• Retake Step 4: Reposition reappraise button only

🎛️ Threshold Configuration

After visual setup, configure these three settings to control automation behavior:

⚙️ Delay Setting

• 100-150ms: Fast (high-end PC, good connection)
• 200-250ms: Moderate (recommended for most)
• 300-400ms: Slow (older PC, laggy connection)

💰 Money Threshold

Sets spending limit. Macro stops when this amount is spent on appraisals. Prevents accidental bankruptcy. Recommended: Set to 20-30% of total money.

⚖️ Weight Threshold

Target weight multiplier. Macro stops when reached or exceeded.

• 1.5: 50% weight increase
• 2.0: 2x weight multiplier
• 2.5: 2.5x weight multiplier
• 3.0: 3x weight multiplier

⌨️ Control Hotkeys

💡 Treasure Appraisal Pro Tips

• 🎯 Test on Common Fish First: Verify settings before using on legendaries
• 💰 Start Conservative: Low money threshold initially (1000-2000)
• 📐 Precise Yellow Box: Most critical step – only numbers, no letters
• ⏱️ Adjust Delay: Slower PCs need 250-300ms, fast PCs 100-150ms
• 🔄 Use Retake: Fix one zone without redoing all 4 steps
• 💎 Prioritize Rare Fish: Save money for legendary appraisals

⚡ Auto Appraisal Macro – Automated Reappraisal System

📦 What is Auto Appraisal Macro?

The Auto Appraisal Macro is an advanced automation tool that handles the complete appraisal workflow with minimal manual intervention. This macro features intelligent spending management, multi-fish batch processing, and preset configuration systems for efficient weight multiplier grinding.

✨ Key Features

📥 Auto Appraisal Installation

1. Ensure AutoHotkey v1.1 is Installed
   Download from https://www.autohotkey.com/ if not already installed.
2. Download Auto Appraisal Macro
   Click the download button above to get the auto appraisal package.
3. Extract Files
   Unzip to your preferred location:
   C:\Users\YourName\Documents\FischAutoAppraisal
4. Run the Macro
   Double-click the .ahk file to launch the auto appraisal system. The configuration interface will appear.

⚙️ Configuration Settings

🎮 Operation Modes

Normal Mode

Processes fish one at a time with standard settings. Best for careful appraisal of valuable catches.

• Sequential fish processing
• Individual weight targeting
• Detailed status updates
• Manual intervention possible

Batch Mode

Processes multiple fish simultaneously with identical settings. Ideal for bulk appraisal of common catches.

• Multi-fish automation
• Uniform weight targets
• Faster processing
• Shared budget allocation

Preset Mode

Uses saved configuration profiles for quick setup. Perfect for repeated appraisal sessions.

• Save custom configurations
• Load previous settings
• Quick start capability
• Multiple preset slots

⌨️ Control Hotkeys

🔄 Complete Workflow

1. Prepare Fish Inventory
   Catch fish and navigate to appraisal menu with your catches ready for processing.
2. Configure Settings
   Set batch size, weight targets, spending limits, and timing delays based on your goals.
3. Select Operation Mode
   Choose Normal, Batch, or Preset mode depending on your appraisal needs.
4. Start Automation
   Press F1 to begin. Monitor progress and adjust as needed using control hotkeys.
5. Monitor Progress
   Watch real-time status updates showing current fish, weight achieved, money spent, and remaining budget.
6. Completion
   Automation stops when all fish reach target weight, budget is exhausted, or manual stop is triggered.

💡 Auto Appraisal Pro Tips

• 💰 Budget Wisely: Allocate more to rare fish, less to common catches
• 🎯 Use Batch Mode: For processing multiple common fish efficiently
• 💾 Save Presets: Create profiles for different fish types or budgets
• ⏱️ Adjust Delays: Higher delays for stability, lower for speed
• 📊 Monitor Spending: Track ROI to optimize threshold settings
• 🛡️ Emergency Stop Ready: Keep F4 accessible for quick stops
• 🔄 Skip Low-Value: Use F3 to skip fish not worth continuing